Heavy-duty design with two large-size housings
The 60w BLDC Square Gear Motor comes standard with two thickened square housings of 80mm and 90mm. The housing features dense reinforcing ribs and an increased wall thickness for the gearbox. It is specially designed for continuous heavy-load operating conditions with medium power of 60W, and its structural rigidity far exceeds that of low-power 60/70mm models.
Extra-wide torque output range
The torque of the 60W BLDC square gear motor ranges from 0.54 to 20 Nm, with a 150% increase in peak torque compared to models of 40W and below. It can handle heavy material conveying and small lifting and tilting equipment at a low speed and large gear ratio of 1/200.
Split dual-wire control architecture
60W BLDC Square Gear Motor with 8-wire Hall high-precision feedback version and 3-wire sensorless economical version share one set of mechanical housings; they only differ in internal wiring harness assemblies. Customers can flexibly select models according to the control accuracy budget of their equipment without replacing the whole machine molds.
Industrial universal winding for all voltages
Covers eight voltage specifications ranging from 12V low-voltage lithium batteries to 310V industrial mains power. AGV logistics vehicles, assembly line equipment and stationary 220V machine tools can share the same motor mechanical structure, reducing inventory models.
Full-range ratio matching dual original base speeds
Two basic stator speeds of 2000rpm and 3000rpm, combined with a full reduction ratio ranging from 1/3 to 1/200, can precisely meet two differentiated speed requirements: high-speed sorting and low-speed heavy-load pushing, without the need to install a secondary reduction gearbox.
Standard universal interfaces for all accessories
60W BLDC Square Gear Motor with unified universal mounting positions for internal and external drivers, electromagnetic brakes, encoders and Hall sensors. No secondary machining of the motor body is required when adding accessories for equipment function upgrades in the later stage, leading to a short transformation cycle.
Q:What core advantages does the 90mm frame 60W motor have over the 80mm model?
A:The 90mm housing features larger heat dissipation area and bigger internal gear modules, resulting in lower temperature rise under 24-hour full load. Its peak torque reaches 20Nm, ideal for heavy-duty equipment with frequent start-stop cycles.
Q:Does the 310V high-voltage model need an extra rectifier power supply for 220V AC input?
A:No extra rectifier is required. The high-voltage motor has built-in rectifier circuit for direct AC220V connection, simplifying internal equipment wiring.
Q:Is the gearbox pre-filled with gear oil at factory? Will oil leak during long-distance sea shipment?
A:The gearbox is pre-filled with special wide-temperature gear oil, equipped with double-layer oil-resistant output seals. No oil seepage or leakage occurs during standard sea and land transport with short upside-down storage.
Hot Tags: 60w bldc square gear motor, China 60w bldc square gear motor manufacturers, suppliers, factory, 100w BLDC Square Gear Motor, 200w BLDC Square Gear Motor, 300w BLDC Square Gear Motor, Bldc Gear Motor, Bldc Gear Motor 48v, Brushless Dc Gearmotor
