Enhanced Power Design in Identical Volume
Our 30W Micro Gear Motor features an 80*80mm body and an overall length of 160mm with a net weight of 2.1kg. It delivers a rated power of 30W without modifying the original mounting dimensions, making it suitable for retrofitting and upgrading existing equipment with no need for new mold development or frame adjustments.
Wide Torque Output Range
The 30W Micro Gear Motor features a full range of gear ratios from 1:3 to 1:300, with output torque ranging from 0.56 to 7.84 Nm, making it suitable for both high-speed and low-speed applications. Both the motor shaft and gearbox output shaft adopt a standard diameter of 10 mm, enabling universal interchangeability of accessories.
Dual-Frequency Mains Compatible Drive
Our AC geared motor is compatible with global single-phase AC power of 50Hz/60Hz, matched with a starting capacitor ranging from 2.2 to 10 microfarads, and features an operating current range of 0.28-0.65A. It can be directly wired for use with standard residential and small industrial mains electricity.
Integrated Multi-Layer Oil-Tight Sealing
The gearbox is equipped with multi-layer sealing gaskets and undergoes air tightness testing for all batches, eliminating any risk of oil leakage during operation. It is suitable for dust-free production lines in the food and electronics industries to prevent materials from being contaminated by oil stains.
Dual Optimization for Noise Reduction & Heat Dissipation
Our product adopts precision gear grinding to reduce transmission vibration, with operating noise 10% lower than standard industry models. The optimized heat dissipation channels for stator windings cut temperature rise by over 10% under full-load operation, making the product suitable for all-weather continuous operation.
Dust & Splash Proof with High Load & Cost Efficiency
IP55 protection safeguards against workshop dust and splashing water, with the ultimate load capacity increased by over 10% and the procurement cost reduced by 10% for the same torque specifications, making it an optimal cost-saving choice for small and medium-sized automated equipment.
Q: Is continuous full-load operation at max torque 7.84Nm allowed?
A:7.84Nm is short-term peak torque. For long-time running, keep load under 70% rated torque to extend service life of windings and gears.
Q:Is extra protection required for this IP55 motor in dusty workshops?
A:IP55 prevents dust buildup and side water splashes, no extra housing needed for normal workshops. Clean heat vents regularly if used under heavy metal grinding dust.
Q:What causes excessive motor heating during operation?
A:Three main reasons: long-term over-rated load, mismatched capacitor specification, blocked cooling air ducts. Reduce load or replace matched capacitor to solve overheating.
Hot Tags: 30w micro gear motor, China 30w micro gear motor manufacturers, suppliers, factory, 6w Micro Gear Motor, ac gear motor, Ac Gear Reduction Motor, High Torque Low Rpm Ac Gear Motor, Induction Gear Motor, Small High Torque Low Rpm Electric Motor
