Reinforced 90*90mm high-power frame
The 40W Right Angle Micro Gear Motor features a thickened 90*90mm square frame and is equipped with a high-power 40W winding. Compared with 25W/30W models, it boasts higher base rigidity, less vibration under heavy-load operation, and is suitable for heavy-duty conveying equipment.
High torque with wide current range
The native torque of the 40W Micro Gear Motor ranges from 246 to 294 mNm, with an operating current of 0.35 to 0.8 A. It is equipped with a large-capacity starting capacitor of 2.5 uF to 12 uF, delivering abundant instantaneous starting power without stalling under 50/60 Hz power grids.
Upgraded thick output shaft & wide torque spectrum
The standard output shaft of the 40W Right Angle Gear Motor is thickened to 15mm, with reduction ratios ranging from 1/3 to 1/300 and a maximum terminal output torque of 9.81Nm, capable of meeting high-load applications such as lifting and heavy-duty conveyors.
IP55 fully sealed anti-leakage construction
40W Gear Motor adopts a multi-oil-seal composite sealing process, enabling the gearbox to achieve 100% zero oil leakage with reliable waterproof and dustproof protection. No additional protective housings are required for dusty workshops or humid spray environments.
Noise & heat reduction for non-stop long-hour operation
Our AC gear motor adopts high-precision precision-ground gear sets that significantly reduce meshing friction, cutting operating noise and working temperature rise by more than 10% simultaneously. It avoids overheating shutdowns during prolonged full-load operation and extends the overall service life of the complete machine.
Heavy-load durability & favorable cost performance
The overall load capacity of this reducer is increased by more than 10%. The right-angle geared motors of the same specification are priced more competitively. It comes with a standard 1-year original manufacturer's warranty, which effectively reduces customers' subsequent maintenance and replacement costs for equipment.
Q:What's the maximum output torque of this 40W right angle gear motor? Is it applicable for lifting machines?
A:Its maximum output torque reaches 9.81Nm. Equipped with high-reduction gearbox, it provides sufficient torque and is perfectly suitable for small lifting and heavy material jacking equipment.
Q:Will the motor overheat and break down under 24-hour non-stop operation?
A:Its temperature rise is reduced by over 10% compared with competing motors. Combined with IP55 sealed heat dissipation structure, it supports all-day continuous full-load operation without winding burnout caused by overheating.
Q:Can this IP55 motor be directly used at workstations with tap water splashing?
A:IP55 rating resists splashing water and dust, making it ideal for workshop washing stations. However, full submersion in water is forbidden, as long-term soaking will damage seals and cause oil leakage.
Hot Tags: 40w right angle micro gear motor, China 40w right angle micro gear motor manufacturers, suppliers, factory, 6w Micro Gear Motor, ac gear motor, Ac Gear Reduction Motor, High Torque Low Rpm Ac Gear Motor, Induction Gear Motor, Small High Torque Low Rpm Electric Motor
