G10 Standard Agricultural Frame Body
Adopts dedicated G10 irrigation motor frame with rated 1HP power. Its size fits large-span center pivot irrigation towers, and universal flange mounting holes match mainstream irrigation gearboxes without modifying mounting brackets during on-site replacement.
IP55 Multi-layer Sealing Protection Structure
Double oil seals on front and rear end covers plus integrated sealed terminal box, with thickened anti-mud baffle on output shaft. It resists erosion from farm rain, mud and fertilizer dust, suitable for all-weather continuous outdoor operation.
Thickened Pure Copper Winding Wide-Voltage Iron Core
Stator wound with high-purity copper enameled wire and widened magnetic circuit iron core. It withstands voltage fluctuations of farm power grids and maintains stable full-load torque without power loss or speed drop.
High Full-Load Operating Efficiency
Optimized stator and rotor magnetic circuits reduce copper and iron losses. It consumes less energy during all-day non-stop irrigation, cutting farm electricity costs obviously and delivering remarkable energy-saving performance versus ordinary motors.
Low Vibration Long-Life Bearing System
Equipped with high-precision maintenance-free rolling bearings, all rotors undergo dynamic balance calibration before delivery. It runs with low temperature rise and slight noise under long-term heavy load, slowing bearing wear and reducing field maintenance downtime.
Built-in Multi-circuit Safety Protection
Integrated protection against phase loss, overload, overheating and short circuit. It automatically cuts power if transmission jams or power supply fails to prevent coil burnout, ideal for unattended large irrigation stations.
Physical photos
| Irrigation motors
|
Q: Does the motor need extra waterproof protection for long-term muddy farm environments?
A: It comes with factory IP55 protection; no extra treatment is required for normal rain and mud splashes. An external rain and dust cover is recommended if the unit stays submerged in water for a long time to extend seal service life.
Q: What is the regular maintenance cycle and key service points of this motor?
A: Clean mud and dust on the shaft end and terminal box every 2000 working hours, refill special high-temperature grease every 6000 hours. Frequent coil disassembly is unnecessary for easy maintenance.
Q: How to restore normal operation after stall protection shuts down the motor?
A: Cut off the main power supply first, clear foreign jamming materials in the gearbox and transmission parts, wait until the motor cools down completely, then reconnect power for automatic reset and restart.
Hot Tags: g10 1 hp irrigation motors, China g10 1 hp irrigation motors manufacturers, suppliers, factory
