Three standard output shaft sizes
The 1.1 kW small geared motor comes standard with three output shafts of 28 mm, 32 mm and 40 mm, matched with exclusive center heights and foot mounting distances respectively. It precisely meets the transmission requirements of medium loads, and redundant models with small shafts are eliminated to simplify model selection.
Full wide speed adjustment range
The reduction ratios of 1.1KW Gear Motors uniformly range from 1:3 to 1:1800, enabling free switching between high and low speed working conditions. Small reduction ratios deliver rapid conveying, while extra-large reduction ratios provide high torque output for low-speed mixing and precision indexing equipment.
Layered body length configuration
The overall length of the basic 1.1KW small motor without a brake is 377 mm, while the electromagnetic brake version comes with two extended frame lengths of 412 mm and 460 mm to meet braking and locking requirements for various installation spaces.
Universal dual frequency for global working conditions
1.1kW Small Geared Motor, 4-pole three-phase standard motor. It delivers stable rotational speeds of 1350rpm and 1650rpm for 50Hz and 60Hz power grids respectively. No modification to motor windings is required for domestic and export equipment, featuring high universal applicability for exports.
Balanced load capacity & reliable durability
The power of the 1.1KW Small Gear Motor is upgraded to 1.1kW, with the maximum overall weight reaching 42.3kg. Its thickened 40mm output shaft enhances radial load capacity, making the shaft resistant to breakage and wear during long-term continuous operation.
One-stop supporting export service
Standardized mass-production models of Small Gear Motor are available with two packaging options: cartons and fumigated wooden cases. They share a unified customs declaration HS code 85015100. Each complete unit comes with a 1-year warranty, and documentation as well as after-sales procedures are streamlined.
Q: What is the total length of basic non-brake model?
A: The standard body without electromagnetic brake is 377mm long; two extended sizes 412mm and 460mm are available after installing brake.
Q: What is the total weight range of the 1.1KW model?
A: 22mm shaft for light-duty mini mechanism; 28mm shaft for normal assembly line conveyor; 32mm large shaft for continuous heavy load working condition.
Q: Why there is no 22mm output shaft model for 1.1KW gear motor?
A: The 1.1kW motor delivers higher torque, thin 22mm shaft cannot bear such load and gets damaged easily, so only 28/32/40mm shaft sizes for medium & heavy load are reserved.
Hot Tags: 1.1kw small gear motor, China 1.1kw small gear motor manufacturers, suppliers, factory, 100W Small Gear Motor, 200W Small Gear Motor, Medium Gear Motor, small gear motor, Small Gear Reduction Motor, Small Geared Electric Motors
