Differentiated Dual Shaft Diameter for High Torque
The 60W Micro Gear Motor features a 90*90mm body frame, a 12mm motor input shaft, and an upgraded 15mm gearbox output shaft. The overall length of the complete unit is 230mm with a net weight of 3.9kg. Its heavy-duty output bearing boasts greatly enhanced load capacity, making it suitable for heavy-duty mechanisms such as heavy material turnover and lifting applications.
High-Power Wide-Current Capacitor Matching System
The rated power of the Micro Gear Motor is 60W, its synchronous speed reaches 1350rpm at 50Hz, and its operating current ranges from 0.3 to 1.2A. It is equipped with a large-capacity starting capacitor of 3.5uF to 16uF, featuring sufficient reserve of heavy-load starting current to deliver powerful startup performance under high-resistance loads.
Full-Range Speed & Ultra-High Torque Output
The reduction ratios of the AC gear motor cover all ranges from 1:3 to 1:300, with output torque ranging from 1.08 Nm to 19.6 Nm. Its peak torque is twice that of 40W models of the same size, making it suitable for both high-speed conveying and heavy-duty transmission requiring high torque.
Multi-Layer Oil-Resistant Sealing for Permanent Leak-Proof Performance
The gearbox of the 60W AC geared motor is equipped with multiple oil-resistant rubber sealing rings inside. Every finished unit undergoes long-term oil pressure immersion leak testing before delivery, eliminating the risk of oil seepage during long-term full-load operation, making it suitable for clean production environments in food and chemical industries.
Split Heat Dissipation Structure with Helical Gear Noise Reduction
Our geared motors adopt high-precision helical gear meshing to reduce transmission resonance, cutting operating noise by 10% compared with standard models on the market. The extended heat dissipation cavity of the motor body enlarges the heat dissipation area of windings, lowering temperature rise under full load by over 10%, enabling 7×24-hour non-stop mass production.
IP55 Industrial Protection & Cost-Effective High Load Capacity
The reducer with IP55 rating is dustproof and splash-proof, enabling stable operation in workshops with dust and cooling water spray. Optimized mechanical structure raises the maximum load capacity by over 10%, lowers procurement costs for the same torque specifications, making it the preferred power source for medium and heavy-duty automated equipment.
Q:Can we add keyways or flat milling positions on the 15mm output shaft of this 60W motor?
A:Yes. Flat key slots and milled flat surfaces can be customized before delivery to match sprockets, gears and couplings. Just confirm the processing dimensions when placing orders.
Q:Will the internal windings get damp and short-circuit if the motor runs in humid food workshops for a long time?
A:IP55 full protection and sealed terminal box are equipped, and windings are insulated with varnish for moisture resistance. However, regular shutdown ventilation is required in workshops with heavy water mist to prevent accumulated moisture.
Q:What inspections should be done before powering on if the motor has been stored for more than half a year without use?
A:First check whether the capacitor bulges or leaks liquid, and measure the winding insulation resistance. Refill gear lubricant, run the motor at low speed with no load for 10 minutes, then connect it to equipment with load after no abnormal performance.
Hot Tags: 60w micro gear motor, China 60w micro gear motor manufacturers, suppliers, factory, 6w Micro Gear Motor, ac gear motor, Ac Gear Reduction Motor, High Torque Low Rpm Ac Gear Motor, Induction Gear Motor, Small High Torque Low Rpm Electric Motor
